Home   >  Product center
Suspended Ceiling T-grid Roll Forming Machine, T Runner, T-BAR



Cold Roll Forming Machines for production metal Ceiling T grid system profiles Brief introduction
We provide you the fully automatic machine with in-line punching of T-bars in the various custom models and sizes. The ceiling T-Bar, T runner roll forming machines are consisted of a Main T-Bar Machine, a Cross T-Bar Machine and an Angle Roll forming machine, for manufacture main T-Bar, Cross-T-Bar, wall angle, ceiling panel.
There have three lines for production the t bar ceiling system, the man t bar roll forming machine, cross t bar roll forming machine and L angle roll forming machine.
Main T Grid roll forming machine
We supply the Complete roll forming Production line for producing Grid system, Suspended ceiling grid Ceiling T Grid, suspended ceiling grid, Exposed Ceiling Grid, T-bars, T-grid, Ceiling T grid ceiling, T Runner in the various models and sizes, Flexibility in the choice of the sizes, of the pitches and of profiles section, Possibility to produce also complex profiles, with special shapes and systems with or without clip; Average or high productivity lines; Dedicated or combined lines for the production of both Main Runners and Cross-T; Innovative solutions for any level of skill
Main T-bar (Tee) Cold Roll Forming Machine consist of Single or Dual Head Type de-coiler, Roll forming main machine, Hydraulic, Automatic Punching and cut-off Device, run-out table, PLC Automatic Control Cabinet.


Main T grid Cold Roll Forming Machine Parameters


Main T bar production machine Accessories:
Holes and ends punching Dies is not including this roll forming machine. These moulds can be custom designed according client drawing or sample.
Cross T-grid cold roll forming machine
We supply the Complete roll forming lines for Ceiling T Grids of Suspension System, T-bars in the various models and sizes, Flexibility in the choice of the sizes, of the pitches and of profiles section, Possibility to produce also complex profiles, with special shapes and systems with or without clip; Average or high productivity lines; Dedicated or combined lines for the production of both Main Runners and Cross-T; Innovative solutions for any level of skill.
Cross T-bar Cold Roll Forming Machine is consist of Single or Dual Head Type de-coiler, Roll forming main machine, Automatic Punching and cut-off Device, run-out table, PLC Automatic Control Cabinet, etc. The main components are showed as the following technology drawing.


Partition beam, T-Grid Roll Forming Machine, Ceiling tee bars, Main T-Bar, Cross-T-Bar, wall angle, Ceiling tee bars, Ceiling T-BAR roll forming machine, high speed T-bar roll forming machine, Ceiling T Bar, T-grid productiom line
Cross T-bar Cold Roll Forming Machine Parameters

Line structure

Portal-type frame style

Forming Roller Stations:

15----18 Stations

Forming Roller shaft:

φ36mm

Forming rollers

GCr15, Quenching, hardness HRC56-62º

Forming Speed:

12 meters / min

Main motor:

5.5kw

Sheet Thickness:

0.3 to 0.35 mm

Cutting mode:

Hydraulic automatic punching and cutting machine

Control mode

PLC

Hydraulic Punching system

Dies of notching both side for CrossT ( 4 ft) 

Dies of notching both side for CrossT ( 2 ft) 

Dies of middle hole for Cross T( 4 ft) 

Dies of overlap for CrossT 

The following Cross T-bar (Tee) Profile is as reference
Cross T-BAR: METAL THICKNESS: 0.28mm; LENGTH: 600mm, 1,200mm


Cross T bar production machine Accessories:
The following dies are not including the roll forming machine, the moulds is additional with punching machine.
Dies of notching both side for Cross T
Dies of middle hole for Cross T
Dies of overlap for Cross T
Wall Angle Roll Forming Machine
Wall Angle Cold Roll Forming Machine (Ceiling Angle Molding machine) consists of Single or Dual Head Type Un-coiler, Roll forming main machine, Hydraulic, Automatic Punching and cut-off Device, PLC Automatic Control Cabinet, etc.
The type of machinery is available with CL type (change-table-set) with pre-punching press for L - angle and W -angle with tab. Ceiling Angle Molding (Wall Angle) Cold Roll Forming Machine Parameters

Line structure

Portal-type frame style

Forming Roller Stations:

10 Stations

Forming Roller shaft:

φ36mm

Forming rollers

GCr15, Quenching, hardness HRC56-62º

Forming Speed:

12 meters / min

Main motor:

5.5kw

Sheet Thickness:

0.3 to 0.35 mm

Cutting mode:

Hydraulic automatic punching and cutting machine

Control mode

PLC

The following Wall Angle (Ceiling Angle Molding) Profile is as reference:
Angle Molding: METAL THICKNESS: 0.45mm; LENGTH: 3,000mm

Ceiling T Grids of Suspension System Application
Ceiling T Grids, A system of Ceiling Suspension System members, The ceiling T Bar Lay in Grid System consists of only one tile per module with both the main runner and cross runner exposed. All edges of the tile are supported by the exposed T bars reducing the chance of visible damage after accessing the ceiling cavity. It is the ideal solution for suburban offices, hospitals and schools offering a simple system that is easy to maintain and install.
T-Runner Suspended exposed ceiling grids

Related Products :

Home | About us | Products | Roll-forming | FAQ | Video | Contact
Copy right © 2014 Jiangyin JACK-AIVA Machine Co., Ltd. All Rights Reserved    Add: No.44 Lidu city garden, Jiangyin City, Jiangsu China